Skip to main content




Pad printing cleaning equipment

Tampo Techniek Nederland BV also known as TTN has been a manufacturer of
pad printing equipment and consumables for more than 35 years. During this period, TTN has
grown into a very experienced supplier for the pad printing industry.

Cleaning machine

Cleaning machine for cleaning pad printing gear such as clichés, base-plates, ink cups, doctor-blade holders and spatulas. The cleaning machine is equipped with a rotating basket which you can fill with pad printing gear. If the cleaning machine is switched on, the basket will be turning around. The gear inside the basket will pass some sprinklers inside the machine which can rinse the gear clean. Only te be used with detergents with a flash point of 55°C or higher. The machine is fully made out of stainless steel.

K40 Model basket Ø40cm.
K60 Model basket Ø60cm.
K80 Model basket Ø80cm.

The cleaning machine can be equipped with all kinds of accessories: Here is an overview of the most common ones:

  • Safety switch on the lid
  • Closing mechanism
  • Level control
  • Particle filter
  • Ventilation system with or without motor

Stainless steel washtray

Pad printing gear that has to be cleaned can be put in this tray. The parts can be put on a basket which can be lowered into the tray. After that you can clean the parts with a brush. Equipped wth a lid to prevent the detergent to evaporate. The tray can be filled with TTN 2575 cleaner liquid. Available in 2 sizes:
450x240x120mm (LxBxH) see photo
600x240x120mm (LxBxH)

Rubber gloves

mportant for your personal protection against the chemicals you use during cleaning.

Contact us

Interested?
Mail us

Contact

Tampo Techniek Nederland B.V.
Mail us

© Tampo Techniek Nederland BV - Website: Van Dongen Design